# Custom Kitchen Cabinets Markham | Toronto Elite

> Custom kitchen cabinets in Markham, ON by Toronto Elite. Serving Unionville, Cachet + area. 17+ years, Red Seal crew. Free estimate.

URL: https://torontoelitekitchencabinets.ca/service-areas/markham/

![Luxury white oak kitchen with panel-ready appliances in Markham](/images/misc/markham-unionville-luxury-kitchen-with-long-white-.webp)

Serving Unionville, Cachet + more

# Custom Kitchen Cabinets in Markham and Unionville

Last updated: October 24, 2026

Markham buyers compare big showrooms along the Highway 7 corridor. We publish per-linear-foot pricing, build with Blum as standard and walk you through the full kitchen in 3D before anything is cut.

-   CAD layout + quote in 1-2 business days
-   15-year workmanship warranty
-   $5M liability + WSIB
-   Unionville
-   Cachet
-   Angus Glen

Request a Free CAD Design + Quote

[/contact/#quote-form →](/contact/#quote-form)

 

Request a Callback

[/contact/#quote-form →](/contact/#quote-form)

-   17+ Years Experience, Licensed & Insured
-   GTA fabricated custom cabinets, cheaper than national brands
-   Free 3D CAD Design & Delivery
-   4-6 week lead time, rush available
-   Premium materials: White Oak & Walnut

City of Markham (York Region)

## Custom Cabinetry for Townhouses, Estates and Century Homes

Typical Markham scopes are large-run luxury kitchens with islands and panel-ready appliances in Unionville, Cachet and Angus Glen, plus 

vanities

[/bathroom-vanities-toronto/ →](/bathroom-vanities-toronto/)

 and 

walk-in closets

[/walk-in-closet-system-toronto/ →](/walk-in-closet-system-toronto/)

 in the same finish.

Every job here is designed, cut and finished by the same 

Toronto cabinet makers

[/ →](/)

 at the same published per-linear-foot rates, with no travel surcharge.

Local work

Large-run luxury kitchens

Experience

Serving York Region since 2008

Coverage

Design visits across Markham and Unionville

Priority 1-2 Day Response

## Free CAD Quote

Tell us about your project. CAD layout + itemized quote within 1-2 business days.

Thanks, we got your request.

A designer will send your CAD layout and itemized quote within 1-2 business days.

The Local Problem

## Markham Kitchen Problems, From Cornell to Cachet

### Fitting a full kitchen into a narrow Cornell townhouse

The kitchen is one long wall and a short return, the fridge blocks the pantry and there is nowhere to put a dishwasher drawer and a garbage pull-out side by side.

**Why it happens here:** Cornell was planned in the 1990s as a New Urbanist community built on compact lots, so many homes are townhouses and narrow detached houses with tighter kitchens than the estate homes in Cachet or Angus Glen.

**Our fix:** Compact-space cabinetry with full-height pantries, 24-inch panel-ready appliances and Legrabox drawer stacks gets more storage out of every inch.

Three failures account for 80% of GTA customer complaints.

-   ### Wrong fit
    
    Installer skipped laser templating; cabinets arrive 3/8 inch short of the wall.
    
    **Our fix:** Proliner 3D laser templating after cabinet removal catches odd walls to 1/16 inch. 
    
    See how
    
    [/laser-templating-toronto/ →](/laser-templating-toronto/)
    
-   ### Wrong finish
    
    Contractor-grade paint instead of UV-cured conversion varnish; drawers chip in six months.
    
    **Our fix:** Benjamin Moore Scuffx or Rubio Monocoat finish that stands up to daily use. 
    
    See how
    
    [/cabinet-material-finish-consult-toronto/ →](/cabinet-material-finish-consult-toronto/)
    
-   ### Wrong hardware
    
    Generic big-box hinges without soft-close; drawers slam, boxes rack within a year.
    
    **Our fix:** Blum Legrabox runners and Blumotion hinges with a lifetime mechanical rating. 
    
    See how
    
    [/cabinet-hardware-selection-install-toronto/ →](/cabinet-hardware-selection-install-toronto/)
    

Services

## Our Most Requested Cabinet Work Here

Published per-linear-foot pricing and the same Blum-standard build on every job.

![Shallow condo entry cabinetry with handleless white oak doors](/images/misc/shallow-condo-entry-wall-cabinetry-with-handleless.webp)

### Compact Space Cabinetry

Entry closets, bath towers, nook storage and blind-corner fixes for condos and small homes, separate from full kitchen renovations.

From $350-$500/lf

[Compact Space Cabinetry →](/compact-space-cabinetry-toronto/)

![Custom walnut Shaker kitchen with a Calacatta Gold quartz waterfall island in a Toronto home](/images/misc/custom-walnut-shaker-kitchen-cabinets-with-calacat.webp)

### Custom Kitchen Cabinets

Baltic Birch ply boxes, Blum Legrabox drawers and your choice of Shaker, flat-slab or inset doors, built in our GTA shop and installed in 3-4 days.

$3,500-$42,000

[Custom Kitchen Cabinets →](/custom-kitchen-cabinets-toronto/)

![Laptop showing a 3D CAD rendering of a custom kitchen beside printed drawings](/images/misc/laptop-on-a-kitchen-table-showing-a-3d-cad-renderi.webp)

### 3D CAD Design + Rendering

OnShape 3D walkthrough of door placement, drawer stacks and panel-ready appliances. Free with a full build or as a design-only package.

$800-$2,500

[3D CAD Design + Rendering →](/3d-cad-design-rendering-toronto/)

![Custom walk-in closet with a white oak drawer island and LED-lit rods](/images/misc/custom-walk-in-closet-dressing-room-with-white-oak.webp)

### Walk-In Closet Systems

House walk-ins and dressing rooms with LED-lit hanging rods, drawer islands and Rev-A-Shelf organizers. Condo suites see Condo Closet Systems.

$5,000-$18,000

[Walk-In Closet Systems →](/walk-in-closet-system-toronto/)

![Custom walnut floating double vanity with a white quartz top in a Toronto bathroom](/images/misc/custom-walnut-floating-double-bathroom-vanity-with.webp)

### Bathroom Vanities

36 to 72 inch custom vanities with moisture-resistant HDF boxes, solid wood or paint-grade fronts and Blum soft-close drawers. 800+ installed.

$1,800-$6,500

[Bathroom Vanities →](/bathroom-vanities-toronto/)

![Sample doors in white oak, walnut, maple and painted poplar on a kitchen island](/images/misc/sample-cabinet-doors-in-white-oak-walnut-maple-and.webp)

### Cabinet Material + Finish Consult

Hands-on review of wood species, door styles, finishes and box substrates with physical samples before you commit.

Written quote after CAD

[Cabinet Material + Finish Consult →](/cabinet-material-finish-consult-toronto/)

See all 26 services

[/services/ →](/services/)

Process

## How the 3D Sign-Off Works

1 week of CAD design and change rounds, 3-4 weeks of CNC fabrication and finishing, 3-4 days on site.

1.  01 / Step
    
    ### Free CAD quote request
    
    Send a few photos and rough sizes through the form. We reply within 1-2 business days to book a design visit.
    
2.  02 / Step
    
    ### Cabinet removal + Proliner laser templating
    
    Old boxes come out first so the laser reads true wall geometry to 1/16 inch, not the line of the old cabinets.
    
3.  03 / Step
    
    ### OnShape 3D CAD walkthrough + sign-off
    
    A Red Seal lead walks you through door placement, drawer stacks and appliance panels. Change rounds happen here, on paper.
    
4.  04 / Step
    
    ### CNC fabrication + finishing in our GTA shop
    
    Boxes are cut on the Biesse Rover CNC, edge banded and finished in our booth over 3-4 weeks while your kitchen stays clean.
    
5.  05 / Step
    
    ### 3-4 day install + post-install walkthrough
    
    WSIB-covered crews level, scribe and adjust every door, then walk the finished room with you before the last payment.
    

## Compare Our Published Rates to Any Showroom

Your written per-linear-foot tally comes before any deposit, and every install carries a transferable 15-year workmanship warranty. No consult fee.

Get a Free CAD Quote

[/contact/#quote-form →](/contact/#quote-form)

 

Request a Callback

[/contact/#quote-form →](/contact/#quote-form)

Why Toronto Elite

## Why York Region Homeowners Skip the Showroom

-   Published per-linear-foot pricing in a showroom-heavy market
-   Blum Legrabox and Aventos standard, not upgrades
-   3D CAD walkthrough of large kitchens and spice kitchens
-   Panel-ready appliance integration modelled from spec sheets
-   Unionville heritage and Angus Glen modern styles from one shop
-   15-year transferable warranty

## York Region Homes We Build For

Angus Glen and Cachet have large detached homes built from the 1990s onward with open kitchens, high ceilings and big islands. Clients often want floor-to-ceiling uppers, panel-ready fridges and a separate pantry or spice kitchen.

Unionville's historic Main Street area has older homes where painted inset or Shaker doors suit the architecture, while newer Unionville subdivisions favour walnut or white oak flat-slab.

Cornell's newer homes often come with builder-grade kitchens that owners replace within ten years, usually with a two-tone design.

## Planning a Large Markham Kitchen

Long runs and tall ceilings push linear footage up, which is the main cost driver. We help you decide where full-height storage earns its cost and where open shelving or a lower upper line works better.

Panel-ready appliances need exact spec sheets. We model the fridge, freezer and dishwasher panels in CAD so they line up with the doors beside them.

Spice kitchens and secondary prep areas are common; they use the same box and hardware standard with more durable counter choices.

## Delivering Up the 404 to Unionville and Cornell

Markham deliveries run up the 404 and across Highway 7 from our GTA shop. Most homes in Cachet, Angus Glen and Cornell have double garages, so boxes go straight in on protected floors.

Large kitchens with 30 or more linear feet and an island are delivered in one load and installed over 4 days, with the island set last so the counter templater sees the whole room.

We book design visits on evenings and weekends for Markham clients who work downtown.

## When to Book a Large Kitchen

Spring is busiest as families plan for summer gatherings. Book 10 weeks ahead for a large kitchen with an island.

Fall installs work well for clients hosting winter holidays.

## Published Pricing vs Showroom Quotes

Showroom quotes in Markham often hide the per-foot rate. Ours is published: Shaker $350-$500/lf, flat-slab $400-$600/lf, paint-grade $500-$750/lf, all-in.

A 30 lf luxury kitchen with a 10 lf island in walnut flat-slab and panel-ready appliances typically lands near the top of our $18,000-$42,000 full custom band.

Case Studies

## Recent Projects From Our GTA Shop

Named neighbourhoods, materials, size, turnaround and project value.

![Walnut Shaker kitchen with a Calacatta Gold waterfall island in a Rosedale heritage home](/images/features/rosedale-heritage-kitchen-with-walnut-shaker-cabin.webp)

Rosedale . Near Mount Pleasant Rd and Crescent Rd

### Rosedale Walnut Shaker Kitchen With Calacatta Gold Waterfall

A 1912 brick house with a 1990s laminate kitchen and plaster walls that leaned 5/8 inch over nine feet. After tear-out, Proliner templating caught the lean and the CAD model added a tapered scribe so the tall pantry meets the wall with no visible gap.

Materials

Walnut Shaker doors, Baltic Birch boxes, Blum Legrabox, Calacatta Gold quartz waterfall island

Size

26 lf + island

Turnaround

6 wks shop + 4 days install

Project value

$36,000-$42,000

Custom Kitchen Cabinets

[/custom-kitchen-cabinets-toronto/ →](/custom-kitchen-cabinets-toronto/)

 

Toronto service area

[/service-areas/toronto/ →](/service-areas/toronto/)

![Flat-slab white oak galley kitchen in a Harbourfront condo suite](/images/features/harbourfront-condo-galley-kitchen-with-flat-slab-w.webp)

Harbourfront . Queens Quay W tower

### Harbourfront Condo Compact Galley With Blum Legrabox

A 710 sq ft suite with a builder galley and a fridge that blocked the dishwasher. We moved to 24-inch panel-ready appliances, submitted the Status Certificate package in one week and sized every box for the freight elevator.

Materials

Flat-slab white oak, Blum Legrabox, 24-inch panel-ready appliances

Size

9 lf galley

Turnaround

4 wks + 3 days install

Project value

$11,000-$14,000

Condo Kitchen Renovation

[/condo-kitchen-renovation-toronto/ →](/condo-kitchen-renovation-toronto/)

 

Toronto service area

[/service-areas/toronto/ →](/service-areas/toronto/)

![Painted poplar kitchen with mitred profile doors in a Leaside house](/images/features/leaside-family-kitchen-with-painted-poplar-mitred-.webp)

Leaside . Near Bayview Ave and Millwood Rd

### Leaside Victorian Paint-Grade Poplar With Mitred Panels

The owners wanted a painted kitchen that would not chip like their last one. Doors are paint-grade poplar with mitred profiles, sprayed in our booth and cured before delivery, with a 5-year finish warranty.

Materials

Paint-grade poplar, mitred profile doors, Benjamin Moore Advance

Size

22 lf

Turnaround

6 wks + 4 days install

Project value

$28,000-$34,000

Custom Kitchen Cabinets

[/custom-kitchen-cabinets-toronto/ →](/custom-kitchen-cabinets-toronto/)

 

Toronto service area

[/service-areas/toronto/ →](/service-areas/toronto/)

Client Reviews

## What Local Clients Say

Named neighbourhoods, real scopes. Ask us for references on any project type.

> "We compared three showrooms on Highway 7. Toronto Elite was the only one that published the per-foot price and named every material."

Wei and Lin Z.

Angus Glen client

> "Main kitchen and spice kitchen in matching walnut. The CAD model caught a clash with our range hood before it was built."

Sanjay K.

Unionville client

> "Panel-ready fridge and freezer columns that line up perfectly with the pantry doors."

Michelle T.

Cachet client

Service Area

## Neighbourhoods We Serve in Markham

-   Unionville
-   Cachet
-   Angus Glen
-   Cornell
-   Markham Village
-   Thornhill (east)

**Postal codes we cover:** L3P, L3R, L3S, L6B, L6C, L6E, L6G

### Local landmarks

-   Main Street Unionville
-   Markville Shopping Centre
-   Pacific Mall
-   Toogood Pond Park
-   Markham Stouffville Hospital

### Getting here

Deliveries run up Highway 404 and across the 407 or Highway 7, with Unionville, Centennial and Markham GO stations close to most of the neighbourhoods we serve.

Got Questions?

## Markham Cabinet Questions Answered

### How do you make a Cornell townhouse kitchen hold more?

Cornell was planned on compact New Urbanist lots, so we lean on floor-to-ceiling pantries, 24-inch panel-ready appliances and deep drawer stacks instead of extra wall cabinets.

### Can you build a period-style kitchen for a Main Street Unionville century home?

Yes. Painted inset doors, beaded face frames and unlacquered brass suit Unionville's 19th-century houses, and we laser template the old walls before building.

### Can you build spice kitchens in Angus Glen and Cachet homes?

Yes. Secondary prep kitchens use the same Baltic Birch boxes and Blum hardware, often with a more durable counter and a stronger hood.

### How is your pricing different from the Highway 7 showrooms?

We publish our per-linear-foot rates and give you a written tally before any deposit, with no consult fee, so you can compare line by line.

### Do you integrate panel-ready appliances in large-run kitchens?

Yes. We build each panel and the toe-kick cut-outs from the appliance spec sheet, so a Cachet fridge column lines up with the cabinet doors beside it.

### Can design visits happen on evenings or weekends?

Yes, design visits in Unionville, Cornell and Markham Village can be booked on evenings and Saturdays.

Still have a question?

Send photos and rough sizes. A designer replies within 1-2 business days.

Ask a Cabinet Expert

[/contact/#quote-form →](/contact/#quote-form)

Nearby Service Areas

## Also Serving Near Markham

Richmond Hill

Bayview Hill, Oak Ridges, Mill Pond, Richvale

View Richmond Hill

[/service-areas/richmond-hill/ →](/service-areas/richmond-hill/)

Scarborough

Scarborough Village, Guildwood, Cliffside, Agincourt

View Scarborough

[/service-areas/scarborough/ →](/service-areas/scarborough/)

North York

Willowdale, Bayview Village, Don Mills, York Mills

View North York

[/service-areas/north-york/ →](/service-areas/north-york/)

## Don't See Your Neighbourhood?

Full GTA from Burlington to Pickering, Aurora to Caledon. Send us your address and room sizes for a free CAD quote.

Free CAD Quote

[/contact/#quote-form →](/contact/#quote-form)

 

Call Shop

[/contact/#quote-form →](/contact/#quote-form)

 

All Service Areas

[/service-areas/ →](/service-areas/)

![](/images/misc/wide-view-of-a-finished-toronto-kitchen-with-walnu.webp)

CAD layout + itemized quote in 1-2 business days

## Book a Free Design Visit in Markham

Book a design visit. CAD layout and itemized, per-linear-foot quote within 1-2 business days.

Request a Free CAD Design + Quote

[/contact/#quote-form →](/contact/#quote-form)

 

Request a Callback

[/contact/#quote-form →](/contact/#quote-form)

-   15-year workmanship warranty
-   Written tally before any deposit
-   $5M liability + WSIB