Skip to main content
NKBA + KCMA CERTIFIED . HGTC RED SEAL . $5M LIABILITY . 17+ YRS GTA
Painted laundry room cabinets with a quartz folding counter over front-load machines
Residential . Shop-built in the GTA . Blum standard

Custom Laundry Room Cabinets for Toronto Homes

Laundry rooms get the same moisture-resistant boxes as our vanities, with counters sized over front-load machines, hanging space for drip-dry and pull-out hampers. Basement laundries are templated around stacks, panels and low bulkheads.

Published price

$350-$500/lf Shaker

per linear foot, by door style

Timeline

4-6 wks

Shop + install

Warranty

15 years

Lifetime on Blum

  • Moisture-resistant HDF or marine-grade ply boxes
  • Folding counters over front-load machines
  • Pull-out hampers and drying rods
  • Fits around basement stacks and bulkheads
Priority 1-2 Day Response

Free Laundry Rooms Quote

Tell us about your kitchen. We'll send a CAD layout + itemized quote within 1-2 business days.

Shared only with our Toronto team.

  • NKBA + KCMA certified
  • HGTC Red Seal lead
  • $5M liability + WSIB
  • 2,100+ GTA installs
  • 97% satisfaction
What Is Included

What Is Included in Laundry Room Cabinetry?

Moisture-resistant cabinets, folding counters and pull-out hampers for main-floor and basement laundry rooms.

  • Moisture-resistant HDF or marine-grade ply boxes
  • Folding counters over front-load machines
  • Pull-out hampers and drying rods
  • Fits around basement stacks and bulkheads
Pull-out double hamper beside a utility sink

What Goes Into Custom Laundry Room Cabinetry?

Laundry room cabinetry is storage, counter space and hanging space built around your washer and dryer. The room is humid, things spill, and in many Toronto houses it sits in a basement corner next to the drain stack and the electrical panel. Stock cabinets struggle in that environment, so we build laundry rooms with the same moisture-resistant HDF boxes as our bathroom vanities and marine-grade ply beside the machines.

Types of Laundry Rooms We Build

Basement laundries

The most common Toronto scope. We template around stacks, panels, bulkheads and sloped slabs, step uppers down where the ceiling drops and keep clearances at the panel and water heater.

Main-floor and second-floor laundries

Smaller rooms or closets with stacked or side-by-side machines, uppers, a hanging rod and pull-outs.

Laundry and mudroom combinations

A laundry run with a boot bench, lockers and hooks by the side door. Pairs well with built-in storage elsewhere in the house.

Laundry Room Cabinet Pricing

ScopeSizePrice range
Uppers + folding counter over pair6 lf$2,100-$3,600
Full laundry wall with sink base + hamper10 lf$3,500-$6,000
Laundry + mudroom, paint-grade14 lf$7,000-$10,500

Counters are quoted with the cabinets. Caesarstone quartz is the most durable folding surface; Formica laminate keeps the budget down.

Leave room to service the machines

A counter over a front-loader looks great until the washer needs a repair. We support the counter on side panels with service clearance, so the machines slide out without removing anything.

Common Laundry Problems We Solve

Swollen boxes beside the washer

Fixed with marine-grade ply and sealed moisture-resistant HDF.

Nowhere to fold or hang

Fixed with a quartz folding counter, a hanging rod and pull-out drying racks.

Awkward basement obstacles

Fixed with laser templating, stepped uppers and removable access panels. Hampers and pull-outs come from our hardware range.

Planning a Laundry Room: Measurements That Matter

Bring three things to the design visit: the make and model of your washer and dryer, the location of the water supply, drain and dryer vent, and a note of anything you cannot move, such as the electrical panel, the water heater or a drain stack.

Machine specs set the counter height. Most front-loaders are 38 to 40 inches tall with a pedestal, or 33 to 34 inches without. We allow at least 1 inch of clearance above the machine and 6 inches behind it for hoses and the vent, then set the folding counter on side panels so the machines slide out for service.

Clearance in front matters as much as storage. Front-load doors swing about 22 inches, and you need room to stand while loading. Keep at least 36 inches clear in front of the machines.

Smart Additions for a Small Laundry

Pull-out hampers

A double hamper sorts lights and darks and slides away when full.

Hanging rod

A rod under the uppers or beside the machines handles drip-dry and freshly pressed shirts.

Pull-out drying rack

A rack that slides out of a base cabinet for delicates, then disappears.

Detergent pull-out

A narrow pull-out beside the machines keeps bottles off the counter.

Utility sink base

A marine-grade sink base for hand-washing and stain soaking.

Caring for Laundry Cabinets

Wipe spills on fronts and counters right away; detergent can stain unsealed surfaces. Check hoses once a year behind the machines. Our boxes are moisture-resistant, but a burst hose is still a burst hose, and a quick check prevents a flood.

Questions to Ask Before You Hire

  • What box material do you use beside the washer?
  • Can the machines be serviced without removing the counter?
  • How will you handle the drain stack, panel or bulkhead?
  • Can you add mudroom storage in the same run?
  • What warranty applies?

Laundry Rooms Across the GTA

Basement laundries are our most common Toronto scope, especially in Roncesvalles, The Junction and High Park North semis. Main-floor and second-floor laundries are more common in newer homes in Brampton, Vaughan and Richmond Hill, often paired with a mudroom by the garage door. Laundry cabinets use the same marine-grade sink bases as our custom kitchen cabinetry in Toronto.

Published Pricing

How Much Do Laundry Room Cabinets Cost in Toronto?

All-in ranges with CNC fabrication and install. You get a written tally after laser templating and before any deposit.

Laundry Room Cabinetry pricing in Toronto
ScopePrice RangeTimeline
Uppers + folding counter over pair, 6 lf $2,100-$3,600 4 wks
Full laundry wall with sink base + hamper, 10 lf $3,500-$6,000 4-5 wks
Laundry + mudroom combination, 14 lf, paint-grade $7,000-$10,500 5-6 wks

Per Linear Foot, All-In

  • Shaker$350-$500/lf
  • Flat-slab wood$400-$600/lf
  • Paint-grade poplar$500-$750/lf

Guaranteed Transparency

Written per-linear-foot quote before any deposit. 25/50/25 payment schedule. 5% off for pay-in-full. No consult fee.

Materials

Materials We Use for Laundry Rooms

Every material is named on your quote, so you can compare like for like.

Moisture-resistant HDF

Sealed-edge HDF boxes that handle humidity from dryers and wet clothes.

Marine-grade plywood

Sink bases and cabinets beside the washer get marine-grade ply for leak tolerance.

Caesarstone or Formica laminate counters

Caesarstone quartz for a folding surface that will not stain, or Formica laminate for a budget build.

Rev-A-Shelf hamper pull-outs

Single or double hamper pull-outs on soft-close runners.

Drying rods and racks

Hanging rods under uppers and pull-out drying racks for delicates.

Painted or wood fronts

Benjamin Moore Advance painted doors or white oak to match the kitchen.

See the full door style, finish and substrate catalogue

Door Styles

  • Painted MDF Shaker

    Classic GTA favourite

  • Solid wood flat-slab

    Walnut, white oak, maple

  • Raised panel

    Traditional, formal

  • Mitred profile

    Transitional

  • Inset

    Heritage, true-to-period

  • Paint-grade poplar

    Full custom colour

Finishes + Hardware

  • Benjamin Moore Advance + Scuffx paint

    Hard-curing paint for painted doors

  • Rubio Monocoat + Osmo natural oil

    Low-sheen oil for walnut and oak

  • UV-cured conversion varnish

    Chip and moisture resistant topcoat

  • Blum Legrabox + Blumotion hardware

    Standard on every job

  • Richelieu + Top Knobs pulls

    Brass, black, nickel, leather

  • Rev-A-Shelf pull-outs + organizers

    Waste, spice, corner, pantry

Box Substrates

  • Baltic Birch plywood

    Standard boxes; sink bases marine-grade

  • Moisture-resistant HDF

    Bath vanities and laundry rooms

  • Melamine-faced ply

    Budget tier and bulk-unit programs

Open the materials page
Why Toronto Elite

Why Choose Toronto Elite for Laundry Rooms?

Moisture-ready boxes

The same moisture-resistant boxes as our vanities, not particleboard.

Fits basement quirks

Scribed around stacks, panels, low bulkheads and sloped slabs.

Machine service clearance

Counters and panels are built so the washer and dryer can still come out.

Laundry + mudroom in one

Boot benches, hooks and lockers combined with the laundry run where space allows.

15-year warranty

Joinery, finish and Blum hardware coverage as standard.

Not sure if you need refacing or new boxes?

A designer can tell from a few photos. You get an honest read and a written range, with no consult fee.

Process

How Does a Laundry Room Project Work?

CAD, laser, CNC, install. The order never changes, because each step protects the next one.

  1. 01 / Step

    Site check

    We note machine models, water and drain locations, the dryer vent and any bulkheads or stacks.

  2. 02 / Step

    Measure + CAD

    Counters are set over the machines with service clearance, and scribes are drawn around obstacles.

  3. 03 / Step

    Shop build

    Boxes are built in moisture-resistant HDF or marine ply over 3-4 weeks.

  4. 04 / Step

    Install

    1-2 days on site, with the counter set and the machines pulled out and back for access.

Before: unfinished basement laundry with an exposed stack in Roncesvalles Before
After: painted laundry cabinets stepped under the bulkhead in Roncesvalles After
Before + After Case Study

Roncesvalles Basement Laundry Around a Drain Stack

Roncesvalles . Near Roncesvalles Ave and Howard Park Ave

A semi-detached basement with the main drain stack, the electrical panel and a 78-inch bulkhead all on the laundry wall. We templated with a laser, built uppers that step down under the bulkhead, boxed the stack inside a removable panel and kept code clearance at the electrical panel. A quartz folding counter sits over the front-loaders with a hanging rod beside it.

Materials
Moisture-resistant HDF boxes, painted Shaker doors, Caesarstone counter, Rev-A-Shelf double hamper
Size
11 lf
Turnaround
4 wks + 2 days install
Project value
$4,600-$6,200
See all 10 GTA case studies
Client Reviews

What Clients Say About Our Laundry Rooms

Named neighbourhoods, real scopes. Ask us for references on any project type.

"They hid the drain stack in a panel we can still open and fit cabinets under our awful bulkhead. The basement laundry is now a room we like."

Natasha B.

Roncesvalles homeowner

"Stacked machines, white oak uppers and a hanging rod in a tiny main-floor laundry. Every inch is used."

Peter Z.

The Junction homeowner

"Laundry and mudroom in one, with a boot bench and a utility sink. The kids actually hang up their coats now."

Maria F.

High Park North homeowner

"Second-floor laundry closet with a pull-out ironing board. Clean work and on schedule."

Steve L.

Leslieville homeowner

"The quote showed per-foot pricing and the box material. No surprises at the end."

Yvonne C.

Bloordale homeowner

Got Questions?

Laundry Room Cabinetry FAQs

How much do laundry room cabinets cost in Toronto?

Laundry cabinetry uses our per-linear-foot rates: Shaker $350-$500/lf, flat-slab $400-$600/lf and paint-grade $500-$750/lf. A 6 lf run of uppers and a folding counter starts near $2,100.

What box material do you use in laundry rooms?

Moisture-resistant HDF with sealed edges, with marine-grade plywood for sink bases and cabinets next to the washer.

Can you build a counter over front-load machines?

Yes. We set the height for your machine model with ventilation and service clearance, and support the counter on side panels so the machines can be pulled out.

Can cabinets fit around a drain stack or bulkhead?

Yes. We laser-template the room and build stepped uppers, boxed stacks and removable access panels.

How long does a laundry room take?

4-6 weeks from CAD sign-off, with 1-2 days on site.

Do you install utility sinks?

We build the sink base and coordinate the sink and faucet. Your plumber or ours makes the final connection.

Can you add a pull-out ironing board?

Yes, along with pull-out hampers, drying racks, detergent pull-outs and hanging rods.

Is laundry cabinetry under warranty?

Yes. 15 years on box joinery, 5 years on paint-grade finish and lifetime on Blum hardware.

Still have a question?

Send photos and rough sizes. A designer replies within 1-2 business days.

Ask a Cabinet Expert

Don't See Your Neighbourhood?

Full GTA from Burlington to Pickering, Aurora to Caledon. Send us your address and room sizes for a free CAD quote.

CAD layout + itemized quote in 1-2 business days

Ready to Plan Your Laundry Rooms?

Book a design visit for laundry room cabinetry anywhere in the GTA. CAD layout and itemized quote within 1-2 business days.

  • 15-year workmanship warranty
  • Written tally before any deposit
  • $5M liability + WSIB
Call Shop Get Free CAD Quote